Required to adjust vehicle height on Cusco brand suspension coilovers. Hook angle is designed perfectly to go against the radius of the spring perches to make vehicle height adjustment an easy task. The 3/8 slot near the handle enables the use of a ratchet wrench extension for when that extra torque is needed. 2 wrenches are typically included with all Cusco suspension kits.
Coil-over Service Wrench 2
Required to adjust vehicle height on Cusco brand suspension coilovers. The swivel neck portion wraps around the coilover perch and latches effectively to make vehicle height adjustment an easy task. The 3/8 slot near the handle enables the use of a ratchet wrench extension for when that extra torque is needed.
Damper Adjustment Adapter
Made from lightweight anodized aluminum, the roulette machined sides of this dial makes the suspension damper adjustment a lot easier. Simply screws on top of the ZERO-3 series coilover for 24 way damper adjustment.
*Applies only for ZERO 3S, ZERO 3R, ZERO 3X
Helper Spring 65mm
Helper springs are used to aid standard suspension coilovers (Non-fully adjustable height) during harsh compression to prevent the main spring from losing its composure. This helper constantly applies preload to the sprung assembly and is at a fully compressed state when the vehicle is at its static ride height.
Helper Spring 73mm
Helper springs are used to aid standard suspension coilovers (Non-fully adjustable height) during harsh compression to prevent the main spring from losing its composure. This helper constantly applies preload to the sprung assembly and is at a fully compressed state when the vehicle is at its static ride height.
Helper Spring Center Sheet
When using the Cusco Helper Springs, aluminum cut 2mm Center Sheets are required to separate the unit from the main spring. These center sheets keep the Helper Springs aligned with the rest of the suspension when the coilover is in motion.
External Reservoir Tank Mount (Billet Aluminium)
Made for the ZERO-3X series suspension or any coilover kits with an to mount the external reservoir onto the chassis. The unit features two tapered holes for screws or can be mounted by simply using zip ties. The external reservoir tank mount is made from billet aluminum so weight savings is a plus.
External Reservoir Tank Mount (Sheet Metal Aluminium)
Made for the ZERO-3X series suspension or any coilover kits with an to mount the external reservoir onto the chassis. The unit includes a backing plate and mounting hardware or it can easily be mounted by simply using zip ties. The external reservoir tank mount is made from aluminum sheet metal so weight savings is a plus.
Rigid Aluminium Spring Seat
Used along with the rubber seat in order to bring a more direct and linear suspension feel. This item enhances the feedback translated from the pavement to the suspension unit and finally to the driver. The ID65 6mm thick sheets can also be stacked and used to fine tune the suspension coilover.
