NISSAN FairladyZ / 350Z
NISSAN FairladyZ / 350Z
Products for Nissan Z33 Fairlady Z/350Z
Note: All those fitment issues are based on Japanese domestic vehicles only. Please confirm with your nearest distributor before ordering.
Note: All those fitment issues are based on Japanese domestic vehicles only. Please confirm with your nearest distributor before ordering.
| Description | Product | Model | Part Number | Remarks | |
| Coilover kit | CUSCO | Zero-1 Stanard top |
Z33/350Z | 251 60E CN | F:-30mm
to 0mm R:-25mm to 0mm |
| Zero-1 Pillow ball top |
251 60E CP | F:-30mm
to 0mm R:-25mm to 0mm |
|||
| Zero-2 Stangard top |
251 60L CN | F:-30mm
to 0mm R:-25mm to 0mm |
|||
| Zero-2
"TITAN" Stangard top To be discontinued, ask availability |
251 60L TN | F:-30mm
to 0mm R:-25mm to 0mm Titanium Lower cases, spring sheets and lock sheets. |
|||
| Zero-2 Pillow ball top |
251 60L CP | F:-30mm
to 0mm R:-25mm to 0mm |
|||
| Zero-2
"TITAN" Pillow ball top To be discontinued, ask availability |
251 60L TP | F:-30mm
to 0mm R:-25mm to 0mm Titanium Lower cases, spring sheets and lock sheets. |
|||
| Notice!!: Using the Pillow Ball bearings will increase the solidity and rigidity, and increase the response toward steering work. But at the same time, will forward the noise and shock into the passanger room, and requires you to regularly maintain the pillow ball bushing as well. |
|||||
| Suspention | Camber arm | Front | Z33/350Z | 251 474 K | 4way
adjustable: +4mm,-4mm,-8mm,-12mm |
| Anti-Sway bar | Front | 251 311 AJ35 | 2
way adjustable(120%/137%) use factory bushing |
||
| Rear | 251 311 B22 | 173% use factory bushing |
|||
| Rear Trailing Rod | 251 474 T: | ||||
| Rear Cotrol Rod | 251 474 E | ||||
| Strut bar | Front | Type OS | 251 540 A | Oval
Shaft (specifically designed for Z33/350Z) |
|
| Engine bay | Blue | Radiator cooling plate | 251 003 AL | ||
| Silver | 251 003 A | Available in US market only | |||
| Clutch | CUSCO | Twin Carbon clutch system | 251 022 TC | Cover
Pressure 1100k Need Nissan Genuine parts Flywheel bolt: 12315-30P01 x8pc Release bearing: 30502-14601 x1pc |
|
| LSD | Type-RS | 1way | MT | LSD 251 F | 1&2way(delivered as 1 way) |
| AT | LSD 252 F | 1&2way(delivered as 1 way) |
|||
| 1.5way | MT | LSD 251 L15 | 1.5&2way(delivered as 1.5 way) |
||
| AT | LSD 252 L15 | 1.5&2way(delivered as 1.5 way) |
|||
| 2way | MT | LSD 251 F2 | 1&2way(delivered as 2 way) |
||
| LSD 251 L2 | 1.5&2way(delivered as 2 way) |
||||
| AT | LSD 252 F2 | 1&2way(delivered as 2 way) |
|||
LSD 252 L2 |
1.5&2way(delivered as 2 way) | ||||
| Type-MZ | 1way | MT | LSD 251 E | 1&2way(delivered as 1 way) |
|
| AT | LSD 252 E | 1&2way(delivered as 1 way) |
|||
| 1.5way | MT | LSD 251 K15 | 1.5&2way(delivered as 1.5 way) |
||
| AT | LSD 252 K15 | 1.5&2way(delivered as 1.5 way) |
|||
| 2way | MT | LSD 251 E2 | 1&2way(delivered as 2 way) |
||
| LSD 251 K2 | 1.5&2way(delivered as 2 way) |
||||
| AT | LSD 252 E2 | 1&2way(delivered as 2 way) |
|||
LSD 252 K2 |
1.5&2way(delivered as 2 way) | ||||
| Hybrid diff. | Hybrid differencial | AT | HBD 252 A |
||
| Roll Cage | Safety21 (Steel) |
4Point | Z33/350Z | 251 270 C20 | Rear section only |
| 5Point | 251 270 D20 | ||||
| 6Point | 251 270 E20 | escape Dash-board | |||
| 251 290 E20 | through Dash-board | ||||
| 7Point | 251 270 F20 | escape Dash-board | |||
| 251 290 F20 | through Dash-board | ||||
| 8Point | 251 270 G20 | escape Dash-board | |||
| 251 290 G20 | through Dash-board | ||||
| 10Point | 251 270 W10 | escape
Dash-board w/front side bars(can not use factory seats.) |
|||
| 251 290 W10 | through
Dash-board w/front side bars(can not use factory seats.) |
||||
| CUSCO
D1 (Chromoly) |
4Point | 251 261 C | Rear section only | ||
| 5Point | 251 261 D | ||||
| 6Point | 251 261 E | escape Dash-board | |||
| 251 265 E | through Dash-board | ||||
| 7Point | 251 261 F | escape Dash-board | |||
| 251 265 F | through Dash-board | ||||
| 8Point | 251 261 G | escape Dash-board | |||
| 251 265 G | through Dash-board | ||||
